Skip to Content

Difference Between Soffit and Fascia

Fascia is a board running parallel to the wall along the front of the eaves. It supports roof tiles and gutters and provides weather protection. The soffit boards run perpendicular to the walls between the wall and the fascia. They’re aesthetic and provide ventilation. Fascia is required; soffits are not.

Difference Between Soffit and Fascia: Overview

The soffit and fascia are two separate parts of a roof, specifically, they are part of the eaves. They go together because they are physically constructed side by side, and both contribute to the appeal and function of a home. Both can be made of a variety of materials, including wood, aluminum, or vinyl.

location of fascia and soffit on a roof overhang or eave

The soffit is located on the underside of the roof overhang, and it has vents to help airflow through the attic. Soffit is not visible on the street. Fascia is located on the outer side of the home’s gutters, making it a contributor to the curb appeal of your home.

What is the Soffit?

The soffit is a siding located underneath your roof where it extends from the wall of your home. Soffits cover the entire underside of these rafters/eaves.

Soffit Functions

It functions in two ways: aesthetically and as a form of ventilation.

Since the soffit is a form of siding, it serves to blend the underside of your rafters with the rest of the outer sides of your home by matching the siding.

Soffits often have vents that allow air to enter and escape through the attic of your home. Attics can become collectors of heat without proper ventilation, which can lead to an increased energy bill or an overheated roof with cracking shingles. These soffit vents are often used in conjunction with ridge vents to ensure adequate attic ventilation.

These vents can also be used to provide ventilation for insulated sheds.

Soffits can also be indirectly involved in other forms of home ventilation. You can vent your bathroom fan or your dryer through a soffit, but only if the correct conditions are met.

House roof overhangs without soffits
Open rafters

Not all homes need a soffit. Some homes have exposed or open rafters where soffits are not necessary. Other homes may not have any areas where their roof extends beyond the walls of their home.

Houses without eaves or roof overhangs

Soffit Materials

Soffits can be made of a variety of materials, including wood, vinyl, fiber cement, and aluminum.

  • Wood soffits are at risk of rotting and warping and can require a lot of maintenance.
  • Vinyl is a more long-lasting type of soffit, resistant to warping, rotting, and cracking. However, vinyl is susceptible to color fading.
  • Aluminum soffit absorbs a lot of heat, which can negate some of its cooling benefits.
  • Fiber cement soffit comes in a variety of aesthetics and resists heat, warping, or cracking.

Soffit Installation

Installation of soffit involves installing an F channel along the wall of your home, which is essentially a track for your soffit to fit into. You will need to install this along the entire edge of your house just below the roof.

Soffit will fit into the F channel in short (foot-long) sections and then is nailed to the sub-fascia, which is a part of the framing of your house. Soffit vents are easily installed in the same way as well.

What is the Fascia?

The fascia is located on the edge of your roof, and it consists of long boards into which your gutters are installed.

Fascia Functions

The function of the fascia is to hold up the gutters, support the roofing by helping to hold up the bottom row of roof tiles and offer the house protection from weather and wildlife.

Unlike the soffit, the fascia is necessary for all homes. These boards/edges stabilize gutter systems and protect and support the roof, so not having them can cause problems.

Fascia Materials

Fascia can be made from materials, such as wood, vinyl, aluminum, and composite.

  • Wood fascia has many of the same potential problems as wood soffit, including rotting and warping. However, wood is an inexpensive building material in comparison to other options. Furthermore, Home Depot will happily cut the boards for you if you purchased the wood there.
  • Vinyl fascia is a durable and inexpensive option that is resistant to water, rot, insect damage, and rust. It can even be installed over wood for improved durability.
  • Aluminum fascia may be a more expensive option but is highly durable and can be installed on top of wood as well.
  • Composite is another more expensive but highly durable option. It is made of a mix of various materials and does not risk discoloration over time.

Fascia Installation

Installation of the fascia is an easy process that involves sliding the fascia board under the drip edge of your roof and using two nails about every 3 ft or so. Each fascia board should overlap the next, and each joint should have two nails.

The hardest part of the installation process will be maneuvering on a ladder and holding up the fascia boards. For this reason, it’s wise to install your fascia with the help of another person to minimize risks and make the process go more smoothly.

Table of Differences Between Soffit and Fascia

LocationThe underside of the house’s eavesAlong the roof edge
FunctionVentilates air through the attic Adds to the home’s overall aestheticSupports roof tiles, supports gutter system, protects the roof from wildlife/weather, and adds to curb appeal
MaterialsWood, vinyl, aluminum, fiber cement, composite, steel, uPVCWood, vinyl, aluminum, fiber cement, composite, steel, uPVC
CostAround $20 to $30 per linear foot, depending on the materialAround $15 to $25 per linear foot, depending on the material
AlternativesGable vents, eyebrow vents, wind turbines, power fansNone

Can You Have a Soffit Without a Fascia and Vice Versa?

The soffit and fascia can and often are used together.

You can have a soffit without a fascia. The soffit is attached to the sub fascia, a part of the house’s framing, rather than the fascia itself, so it is possible to have a soffit without fascia. However, it is not recommended. The fascia is important for protecting roof tiles and supporting the gutter system.

You can have a fascia without a soffit. Not all homes need soffit because they leave their rafters exposed under their overhangs.

However, having open rafters means less protection from pests and weather. They can allow more water into the house, which can lead to rot of house materials. Open rafters should only be attempted with proper planning and consultation with experts.


Amazon and the Amazon logo are trademarks of, Inc, or its affiliates.